Self-Install Support
We're here to support you!
For help installing,
Please select the relevant product below.
If you are installing a Smart Base Station or Hubs, please email us for more information.
Related Articles
Contractor Install Support
Valve and Actuator Installation Determine Valve Location Installation near a current valve: If you are installing a TDG valve near an existing valve, in most cases it is preferred to locate the TDG valve in line after the current valve. ...Valve Controller Installation & Commissioning
If you are replacing a Valve Controller, please use this solution article link as there are a few additional steps to follow. Replacing a Valve Controller If you are installing a new valve controller, the following steps within the Trident Platform ...NEW! Trident Installation & Operation Manual
The Trident Installation and Operation Manual is a complete .pdf that covers the installation, operating, Trident configuration, and troubleshooting of the Trident System. The manual can be downloaded in the attachment section below. See Also Trident ...DT-503 Trident Valve Controller Data Sheet
The DT-503 Trident Valve Controller is one of several endpoints TDG offers. The valve controller can act as a sensor with the 2 probes resting on a surface and control up to 2 STOPflow valves through our cloud valve groups. Valves are connected via a ...DT-505 STOPflow Valve Data Sheet
The DT-505 STOPflow Valve is connected to a Valve Controller and triggered to close based on a water alarm event. Valves can be located away from the Valve Controller and connected via a control cable. Locking 5-pin control cable connection .5" - 2" ...