Valve Reports
A valve report can be produced to view all active valves, names, valve groups and trigger endpoints. This report should be verified for accuracy and can be exported for future use.
Go to Reports-Valves from the sidebar.
This report gives you a detailed view of all your valve
groups and devices included in those groups.
Export report
See Also
Related Articles
Endpoint Report
An Endpoint Report will provide the end user with a list of all active sensors and valve controllers. This report will include the specific SBS devices are communicating to, names/locations of endpoints, battery levels, valve group information and ...Replacing a Valve Controller
If you are replacing a valve controller, the following steps within the Trident Platform are necessary. You will need proper login access to complete these steps. Update the old valve controller name Change the status of the valve controller being ...Hub Report
A Hub Report will produce a list of all hubs installed on your Trident System and include relevant Hub information. Information included Serial number Connected SBS Registration time Building, floor, location information Battery levels To access, go ...DT-505 STOPflow Valve Data Sheet
The DT-505 STOPflow Valve is connected to a Valve Controller and triggered to close based on a water alarm event. Valves can be located away from the Valve Controller and connected via a control cable. Locking 5-pin control cable connection .5" - 2" ...DT-503 Trident Valve Controller Data Sheet
The DT-503 Trident Valve Controller is one of several endpoints TDG offers. The valve controller can act as a sensor with the 2 probes resting on a surface and control up to 2 STOPflow valves through our cloud valve groups. Valves are connected via a ...