Hub Report
A Hub Report will produce a
list of all hubs installed on your Trident System and include relevant Hub information.
Information included
- Serial number
- Connected SBS
- Registration time
- Building, floor, location information
- Battery levels
To access, go to Reports-Hubs from the sidebar.
This report can be exported as well by
selecting the preferred option.
Related Articles
Valve Reports
A valve report can be produced to view all active valves, names, valve groups and trigger endpoints. This report should be verified for accuracy and can be exported for future use. Go to Reports-Valves from the sidebar. This report gives you a ...Endpoint Report
An Endpoint Report will provide the end user with a list of all active sensors and valve controllers. This report will include the specific SBS devices are communicating to, names/locations of endpoints, battery levels, valve group information and ...Water Alarm Report
Water Alarm Reports can be viewed by going to reports-water alarms on the sidebar. This report can be generated based on buildings and a set time frame. Information included on a report Device information and location Alarm timestamps, length of ...DT-501 Trident Hub Data Sheet
The DT-501 Trident Hub is part of the RF communication backbone of the Trident Leak Detection System. Hubs are required on the Trident System as they create a mesh network between other hubs as well as pass messages from endpoints (sensors/valve ...Daily Report
Daily Report By default daily reports are generated by the Trident Management Studio at 7am Monday-Friday. The information included in these reports is fully configurable to the user by going to groups-notification groups on the sidebar. To edit ...