DT-MR-KIT Trident Mechanical Room Kit Data Sheet
The DT-MR-KIT Mechanical Room Kit is an option designed for mechanical rooms or other small spaces where leak detection is needed. The kit includes all necessary components to self install a Trident System.
Includes
A. 1- Trident Smart Base Station (SBS)-requires network connected via ethernet or cell (Annual Software Agreement required)
B. 1- Trident Hub
C. 5- Trident Wireless Sensors
D. 2- 5ft. Water Sensing Cables
E. 2- 10' Water Sensing Cables
- Access to the Trident Platform for system management
- Notifications for water alarms, power disconnected, low battery, lost communication
- Wireless RF communication (sub-1000 MHz)
- Standard outlet required for Hub and SBS power supply
- Network connection required
- UL Listed (adapters) and FM Approved

You can download the data sheets in the attachment section below

See Also
Related Articles
Trident Overview
Introducing the Trident Wireless Water Leak Detection System. With over a decade of experience, TDG is the leader in water leak detection for commercial buildings with its cutting-edge FM Approved Trident technology- the gold standard for water leak ...
DT-550 Trident Smart Base Station Data Sheet
The DT-550 Trident Smart Base Station (SBS) is part of the RF communication backbone of the Trident Leak Detection System. The SBS is the brains of the system, receiving status and messages from hubs and endpoints (sensors/valve controllers). The SBS ...
DT-501 Trident Hub Data Sheet
The DT-501 Trident Hub is part of the RF communication backbone of the Trident Leak Detection System. Hubs are required on the Trident System as they create a mesh network between other hubs as well as pass messages from endpoints (sensors/valve ...
DT-552 Trident Wireless Sensor Data Sheet
The DT-552 Trident Wireless Sensor is one of several endpoints TDG offers. The wireless sensor can be installed virtually anywhere as long as the two probes are on the surface you wish to protect. If you need to mount the sensor on a wall or off the ...
DT-502 Trident Wireless Sensor Data Sheet
The DT-502 Trident Wireless Sensor is one of several endpoints TDG offers. The wireless sensor can be installed virtually anywhere as long as the two probes are on the surface you wish to protect. If you need to mount the sensor on a wall or off the ...