DT-501 Trident Hub Data Sheet
The DT-501 Trident Hub is part of the RF communication backbone of the Trident Leak Detection System. Hubs are required on the Trident System as they create a mesh network between other hubs as well as pass messages from endpoints (sensors/valve controllers) to the Smart Base Station (SBS).
- Rechargeable internal backup battery
- Notifications for power disconnected, low battery, lost communication
- Wireless RF communication (sub-1000 MHz)
- Standard outlet required for power supply
- Typical buildings require 1 Hub per every 1-5 floors
- UL Listed (adapter) and FM Approved
You can download the data sheet in the attachment section below
Related Articles
DT-550 Trident Smart Base Station Data Sheet
The DT-550 Trident Smart Base Station (SBS) is part of the RF communication backbone of the Trident Leak Detection System. The SBS is the brains of the system, receiving status and messages from hubs and endpoints (sensors/valve controllers). The SBS ...DT-MR-KIT Trident Mechanical Room Kit Data Sheet
The DT-MR-KIT Mechanical Room Kit is an option designed for mechanical rooms or other small spaces where leak detection is needed. The kit includes all necessary components to self install a Trident System. Includes A. 1- Trident Smart Base Station ...DT-503 Trident Valve Controller Data Sheet
The DT-503 Trident Valve Controller is one of several endpoints TDG offers. The valve controller can act as a sensor with the 2 probes resting on a surface and control up to 2 STOPflow valves through our cloud valve groups. Valves are connected via a ...DT-502 Trident Wireless Sensor Data Sheet
The DT-502 Trident Wireless Sensor is one of several endpoints TDG offers. The wireless sensor can be installed virtually anywhere as long as the two probes are on the surface you wish to protect. If you need to mount the sensor on a wall or off the ...DT-552 Trident Wireless Sensor Data Sheet
The DT-552 Trident Wireless Sensor is one of several endpoints TDG offers. The wireless sensor can be installed virtually anywhere as long as the two probes are on the surface you wish to protect. If you need to mount the sensor on a wall or off the ...